Q32 crawler shot blasting machine has the advantages of advanced design, reasonable structure, low energy consumption and high efficiency.
The advantages of the crawler-type shot blasting machine are from the modeling to the finishing of the fully automated production line. The production process is clearly arranged, the product consistency is greatly improved, there is no intermediate stacking area, and the transmission distance is shortened. Because the entire shot blasting process can be integrated
The steel crawler shot blasting machine is imported from the United States. All carbon steel and manganese steel are used in the chamber. It does not need to be replaced for many years. It is suitable for mass production of forged castings and the surface cleaning and strengthening of welded structural parts. The machine has a feeding system. Due to the good protection measures of the machine, the shot blasting effect is good.
Q32 series of crawler shot blasting machine is suitable for surface derusting or shot blasting strengthening of many varieties, large and medium batches. The workpiece must be castings and heat-treated parts with a unit weight of 25 kg or less without fear of collision. Can be used stand-alone or wired.
The concrete road shot blasting machine is powered by electricity, accelerates the projectile by centrifugal force, and shoots the cleaned plane. It is a non-contact cleaning for long-range projection.
The mobile shot blasting machine used shot peening technology on the horizontal surface is the first used by the US Navy to remove the rubber marks left on the deck of the aircraft. However, the use of this technology was limited by the lack of power systems available at the time for production and machinery, and was not immediately used in
Advantages of the double hook type shot blasting machine: ◆ It adopts the popular form of no pit structure, which saves the construction cost and time of the pit foundation, and also solves the problem that the users in the south caused the water in the pit to cause the shot in the elevator The problem of sand rusting and agglomeration. ◆ Using large shot blasting
The q3710e hook type shot blasting machine has a large shot blasting amount, high cleaning efficiency, large room effective space, compact structure, and uses no pit form. There are no special requirements for the shape and structure of the workpiece to be cleaned. Products are widely used in machinery manufacturing and foundry industry.
The term of Q376Q378 hook shot blasting machine is a kind of hanging shot blasting machine, which is divided into single hook shot blasting machine and double hook shot blasting machine. Because the maximum load of the hook is 600KG and 800KG respectively, it is called 376 and 378 models, and the size of the chamber is also different. The Q376 hook shot blasting machine is (length, width and height) 1500 * 1500 * 2000mm, Q378 hook The shot blasting machines are 1800 * 1800 * 2800mm.
The large-scale hook shot blasting machine is suitable for manufacturers who are afraid of collisions and crane-free. The hook carries the workpiece into the cleaning room for shot blasting. It has a rotation mechanism. The workpiece can be designed to reciprocate and rotate in the shot blasting room. Achieve no dead corners,
Today I share the latest product of our factory catenary shot blasting machine, which is mainly suitable for shot blasting of large quantities of workpieces. From the structural form, it can be generally divided into Q38 series continuous passing type, Q48 series ordinary catenary stepping passing type, Q58 series accumulation chain type and other categories.
The through-blast blasting machine recently delivered by our factory in 2017 can work continuously and uninterruptedly, for all types of steel materials, such as steel plates, steel, steel beams, sections, steel pipes and cast steel, etc. Cleaning up
Pass-through shot blasting machines mainly rely on the kinetic energy of high-speed projectiles to remove the oxide scale, rust layer and dirt on the surface of steel. Therefore, the pass-through shot blasting machine is a physical surface treatment technology and will not have any impact on the steel itself. The dust generated during the impact of high-speed projectiles is filtered by a dust collection system.
Small-scale pass-through shot blasting machines generally refer to smaller-scale pass-through shot blasting machines, and have no specific boundary with large-scale pass-through shot blasting machines.
Roller pass type shot blasting machine. During the cleaning process, the electrically controlled speed-adjustable conveying roller table feeds the steel structure or steel into the projectile area of the cleaning machine room. All sides of the body are hit by strong dense projectiles from different coordinate orientations. And friction, so that the oxide scale, rust layer and its dirt on it quickly fall off, the surface of the steel will obtain a smooth surface with a certain roughness, and the workpieces will be loaded and unloaded at the entrance and exit rollers on both sides of the outdoor. The projectile and rust dust falling on the steel are blown by the blowing device, and the dropped dust and dust mixture is conveyed by the recovery screw to the chamber funnel. The vertical and horizontal screw conveyor is collected at the lower part of the elevator, and then lifted to the upper part of the machine for separation. In the device, the separated pure projectiles fall into the separator hopper for the shot blasting cycle. Dust generated during shot blasting is sent to the dust removal system by the exhaust pipe, and the cleaned air is discharged into the atmosphere, and particulate dust is captured and collected.
Catenary through shot blasting machine is mainly suitable for shot blasting of large batches of workpieces. From the structural form, it can be generally divided into Q38 series continuous passing type, Q48 series ordinary catenary stepping passing type, Q58 series accumulation chain type and other categories.
Covers an area of 20,000 square meters, a professional technical team, with dozens of shot blasting machine assembly technical workers
Shot blasting machine, drum type shot blasting machine, hook type shot blasting machine, crawler type shot blasting machine, pass type shot blasting machine, direct shot blasting machine, belt shot blasting machine
Using HT200, HT2500 and other high-quality materials, CAD advanced technology to develop new products
Professional senior engineer team, providing one-stop service solution for shot blasting machine
Has a warehouse of more than 2,000 square meters, more than 5,000 conventional product inventory , sufficient supply and guaranteed delivery speed
Shot blasting machine, shot blasting machine and other products, complete specifications, to meet the needs of the market to the greatest extent, so you have no worry
Perfect quality assurance system, combining self-inspection, mutual inspection, and special inspection to ensure 100% product qualification rate
Industry-leading production base, large-scale production, eliminating intermediate links, lower costs, and optimal prices
7 * 24 hours quick response to solve your confusion in time
Manual on-site commissioning, customized installation and construction plan
Professional after-sales technical team, regular new and old customers return visits, and provide technical guidance
National efficient cooperative logistics, efficient and fast
Botou Hongxin Machinery Manufacturing Factory was founded in 1986 in Botou City, a well-known foundry town in the country, close to the Beijing-Shanghai Railway and National Highway 104 and 106. Strategic location and convenient transportation. Our factory has a perfect quality assurance system, passed the quality system certification of the Quality Certification Center of China Fangyuan Certification Committee, and obtained the ISO9001 international quality management standard certification. In order to open up the market and realize mutual benefit, we will serve the customers wholeheartedly with the tenet of customer first, abide by contracts, and affordable prices. My factory owner ...
The shot blasting machine is mainly used to remove rust and clean the surface of the product. The application range is very wide, covering almost all hardware industries. 1.Bearing factory bearings are pressed by the mold, the surface is relatively smooth, but sometimes there are impurities or hair
Hook pass type shot blasting machine is a type of pass type shot blasting machine. The hook trolley type combined shot blasting machine designed according to the size of large workpieces and process requirements is mainly used for surface treatment of large steel structures to achieve removal. Steel structure rust, old patent leather and old